Kolink KLM-002 Micro-ATX Desktop Case – Black/Grey
Kolink is expanding their range of cases with the addition of a new, compact, as well as high-performance case that is designed for use in schools as well as offices. Get ready for the Micro-ATX KLM-002: in terms of pure flexibilty bearing in mind the dimensions, this case is a force to be reckoned with. Depending on your space requirements, the case is designed for horizontal or vertical use. The interior allows for up to three 2.5″ drives to be installed. A pre-installed 80mm fan helps ensure more than adequate cooling.
THE FEATURES OF THE KOLINK KLM-002 AT A GLANCE:
Compact mini case: 35.5 x 9.5 x 28.5cm
For motherboards up to Micro-ATX, processors with integrated GPU
Horizontal or vertical orientation, stand included with case
Slots for a 3.5- and 2.5″ drive or up to three 2.5″ drives
One pre-installed 80mm fan
Supports SFX power supplies
I/O Panel with 1x USB 3.0, 2x USB 2.0, Audio In/Out
KOLINK KLM-002: THE COMPACT CASE FOR SCHOOLS AND OFFICES
With a height/width of just 9.5cm the Kolink KLM-002 is exceptionally compact and can be set to the orientation you prefer depending on the space available with the help of an included stand. All told, this makes the KLM-002 an outstanding choice for use in spaces with large numbers of systems such as offices and schools. Despite the compact dimensions however, the KLM-002 is built to support a large amount of hardware regardless.
The case supports Micro-ATX- and Mini-ITX form factor motherboards. As for graphics cards, 9.5cm of space is available, although the case is ideally suited for use with CPUs that include and integrated GPU. If you do require the extra gaming horsepower however, a low-profile GPU with a max length of approx. 150mm can be installed.
HARD DRIVES & SFX POWER SUPPLY SUPPORT
With air vents on the back, sides and roof, the case is designed from the ground up with airflow in mind, helped by the presence of a pre-installed 80mm fan. On the interior, a total of three 2.5″ drives can be installed, and alternatively a 3.5″- and a 2.5″ drive are also supported. A compact SFX-form factor power supply is required due to the dimensions of the case, this points outwards from the bottom of the case when set vertically. An angled kettle cable must be used so that the cable can be guided out towards the rear.
Functionality aside, the appearance of the KLM-002 cuts no corners either. The front has the appearance of brushed aluminium. The I/O panel is also located on the front, offerings a USB 3.0- and two USB 2.0 ports. Two 3.5″ jacks for headphones and microphones are available. The power switch is mounted to the side along the edge of the case’s front cover.
TECHNICAL DETAILS:
Dimensions: 285 x 95 x 355 mm (W x H x D)
Weight: approx. 2.5 kg
Material: Steel, plastic
Colour: Black
Form factor: Micro-ATX, Mini-ITX
Total possible fans:
1x 80 mm (side)
Pre-installed:
1x 80 mm (side)
Drive bays:
1x 2.5″ + 3.5″ or 3x 2.5″
PSU: 1x Standard SFX (optional)
Expansion slots: 4
I/O Panel:
1x USB 3.0
2x USB 2.0
1x Audio In/Out
Max GPU length: approx.150 mm (limited by PSU, integrated CPU/GPU recommended)
Max CPU Cooler height: approx. 75mm
Specifications
expand_less
TECHNICAL DETAILS:
Dimensions: 285 x 95 x 355 mm (W x H x D)
Weight: approx. 2.5 kg
Material: Steel, plastic
Colour: Black
Form factor: Micro-ATX, Mini-ITX
Total possible fans:
1x 80 mm (side)
Pre-installed:
1x 80 mm (side)
Drive bays:
1x 2.5″ + 3.5″ or 3x 2.5″
PSU: 1x Standard SFX (optional)
Expansion slots: 4
I/O Panel:
1x USB 3.0
2x USB 2.0
1x Audio In/Out
Max GPU length: approx.150 mm (limited by PSU, integrated CPU/GPU recommended)
Max CPU Cooler height: approx. 75mm
Reviews
There are no reviews yet