ValueRAM’s KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM use gold contact fingers. 

    Power Supply: VDD = 1.2V Typical

    VDDQ = 1.2V Typical

    VPP = 2.5V Typical

    VDDSPD = 2.2V to 3.6V

    Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals

    Low-power auto self refresh (LPASR)

    Data bus inversion (DBI) for data bus

    On-die VREFDQ generation and calibration

    Dual-rank

    On-board I2 serial presence-detect (SPD) EEPROM

    16 internal banks; 4 groups of 4 banks each

    Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)

    Selectable BC4 or BL8 on-the-fly (OTF)

    Fly-by topology

    Terminated control command and address bus

    PCB: Height 1.18” (30.00mm)

    RoHS Compliant and Halogen-Free

Specification

Series: Kingston ValueRAM

DDR Type: SODIMM DDR4

Size: 1 x 16GB

#Hide#Individual Module Size: 16GB

Speed: 2666 MHz

Compliance: PC4-21300

Pins: 260-pin

CAS Latency: 19-19-19

Data Integrity Check: Non-ECC

Voltage: 1.2V

Additional Information: See Overview

Package Type: Retail

Package Weight: 0.0225 kg

Warranty: Lifetime