WINDFORCE 3X COOLING SYSTEM
The WINDFORCE 3X cooling system features 3x 80mm unique blade fans, alternate spinning, 3 composite copper heat pipes direct touch GPU, 3D active fan and Screen cooling, which together provide high efficiency heat dissipation.

ALTERNATE SPINNING
Reduce the turbulence of adjacent fans and increase air pressure.

SMOOTH AIRFLOW
GIGABYTE turns the adjacent fans in the opposite direction, so that the airflow direction between the two fans is the same, reducing the turbulence and enhancing the airflow pressure.

3D ACTIVE FAN
The 3D Active Fan provides semi-passive cooling, and the fans will remain off when the GPU is in a low load or low power game.

UNIQUE BLADE FAN
The airflow is spilt by the triangular fan edge, and guided smoothly through the 3D stripe curve on the fan surface.

GRAPHENE NANO LUBRICANT
Graphene nano lubricant can extend the life of fan by 2.1 times, close to the life of double ball bearing, and is quieter.

SCREEN COOLING
Extended heatsink design allows air flow to pass through, providing better heat dissipation.

HEAT PIPES DIRECT TOUCH
The shape of the pure copper heat pipe maximizes the direct contact area with the GPU. The heat pipe also covers the VRAM through a large metal plate contact to ensure proper cooling.

PROTECTION BACK PLATE
The back plate not only provides an aesthetical shape, but also enhances the structure of the graphics card to provide complete protection.

EXTREME DURABILITY
The graphics card uses the better power phase design to allow the MOSFET to operate at lower temperature, and over-temperature protection design and load balancing for each MOSFET, plus the Ultra Durable certified chokes and capacitors, to provide excellent performance and longer system life.

FRIENDLY PCB DESIGN
Fully automated production process ensures top quality of the circuit boards and eliminates sharp protrusions of the solder connectors seen on the conventional PCB surface. This friendly design prevents your hands from getting cut or inadvertently damaging components when making your build.

AORUS ENGINE
The cutting edge intuitive interface allows you to adjust the clock speed, voltage, fan performance and power target in real-time according to your game’s requirements.

Main Features
Powered by AMD RDNA 2 Radeon RX 6600
Integrated with 8GB GDDR6 128-bit memory interface
WINDFORCE 3X Cooling System with alternate spinning fans
Screen cooling
Graphene nano lubricant
Protection back plate

GPU
Chipset Manufacturer    AMD
Chipset Model Name    Radeon RX
Chipset Model Number    6600
Chipset Additional Information    EAGLE
Chip Clock    Up to 2044 MHz

Storage
Memory Size    8192 MB

Memory
Memory Clock    14 Gbps
Memory Type    GDDR6
Memory Width    128 bit
Memory Bandwidth    224 GB/s

Interfaces/Ports
Video Card Bus Type    PCI Express
Video Card Bus Version    4.0 x16
HDMI Port    2 x HDMI 2.1
DisplayPort    2 x DisplayPort 1.4a

System Requirements
Operating Systems Supported    1 x PCI Express 4.0 x16 slot
Recommended 500W or greater PSU with 1 x 8-pin PCIe connector

Resolution
Multiple Monitor Support (Max)    Yes (4)
Maximum Resolution    7680 x 4320 pixels

Physical
Form Factor    Graphics Card
In The Box    Graphics Card
Quick Guide
Width    41 mm (Dual Slot)
Depth    282 mm
Height    113 mm
Pack Quantity    630 g

Warranty
Warranty    3 Years

Key Features
Interface Type    PCI Express 4.0 x16
VGA Connection    No
DVI Connection    No
HDMI Connection    Yes
Graphics Usability    Gaming
DisplayPort Connection    Yes
Direct X Support    Direct X 12
Cooler Type    Dynamic Fan
Low Profile    No
AMD Radeon    RX 6600
PCI-E Pin Type    8-Pin
FreeSync    Yes
Cooling Technology    Dynamic Fan
VR Ready    AMD
GPU Length    282 mm
Card Width    Dual Slot

Graphics
Graphics Chipset    Radeon RX 6600