Draytek VigorAP 912C 802.11ac Wave 2 Dual-Band Access Point

Ceiling Mesh Wireless 802.11ac Range Extender & Access Point
VigorAP 912C is a high-performance Mesh Wireless solution, designed to expand the wireless coverage, eliminate Wi-Fi dead zones and significantly reduce the cost of network deployments. It can also be used as a traditional access point either managed or stand alone so has the flexibility to be used how you need it.

The VigorAP 912C is a dual-band 802.11ac Wave 2 Mesh Wireless solution, designed to eliminate wireless drop outs, stuttering videos, slow download speeds, poor signal and Wi-Fi dead zones. One access point acts as the controller (Mesh root) and in total up to 8 access points create an easy to manage wireless mesh. Extend coverage without running expensive cabling.

Initial setup of the VigorAP 912C is easy with the DrayTek Wireless app, whether it’s creating a new Mesh network or being set up in AP and Range Extender modes, the Quick Start Wizard assists throughout.
Manage the VigorAP 912C centrally through the VigorACS central management platform, VigorConnect, Router AP Management, or simply on its own as a stand-alone access point. The VigorAP 912C has the flexibility to be used how you need it.

Frequency Band     2.4 GHz, 5 GHz
Wi-Fi AC Rating     AC1200
Form Factor     In-ceiling
Connectivity Technology     Wireless
Data Transfer Rate     866 Mbps
Data Link Protocol     IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Remote Management Protocol     SNMP 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, CLI, TR-069
Performance     Maximum data rate (2.4 GHz): 300 Mbps ¦ Maximum data rate (5 GHz): 866 Mbps
Wi-Fi Rating     AC1200
Features     Power over Ethernet (PoE), repeating mode, Syslog support, MAC address filtering, Wireless Distribution System (WDS) support, firmware upgradable, wall mountable, Mesh networking, Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), RADIUS support, Wi-Fi Protected Setup (WPS), Multiple SSID support, hidden SSID, reset button, 2T2R MIMO technology, DHCP client, tagged VLAN, band steering, Airtime Fairness, Multi-User MIMO & Beamforming technology, AP-Assisted Roaming, Wireless Auto On/Off, Multi-SSID over Mesh, Client Limit per SSID, Trusted DHCP Server IP for WLAN, Device Object/Group Control
Encryption Algorithm     TLS, PEAP, WPA2, WPA2-PSK, WEP, WPA3
Authentication Method     RADIUS, Radio Service Set ID (SSID)
Compliant Standards     IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.11ac Wave 2
General
Device Type     Radio access point
Width     16.2 cm
Depth     16.2 cm
Height     4.2 cm
Weight     300 g
Aerial
Antenna     Internal
Expansion / Connectivity
Interfaces     1 x 1000Base-T (PoE) – RJ-45
Miscellaneous
Included Accessories     Ceiling mounting kit, T-Rail mounting kit
Cables Included     1 x network cable
Power
Power Over Ethernet (PoE) Supported     PoE
Power Device     External power adapter
Voltage Required     AC 100 – 240 V
Power Consumption Operational     10 Watt
Manufacturer Warranty
Service & Support     Limited warranty – 2 years
Environmental Parameters
Min Operating Temperature     0 °C
Max Operating Temperature     45 °C
Humidity Range Operating     10 – 90% (non-condensing)