Boost your gaming aesthetic with the CiT Raider Black ATX Gaming Case. Featuring six ARGB Inner-Ring Infinity fans as well as providing ample support for all your high-end hardware!

This CiT Raider Black ATX Gaming Case is a stylish option for your computer. It has two tempered glass panels on the sides (one tinted more than the other) that look cool. The case also has plenty of room for fancy RGB lighting and fans. Plus, there are special holes behind the motherboard to make hiding your cables a breeze, keeping your whole setup looking neat and tidy.

Install another two fans to fully populate the Raider and make it eight fans and with up to three water cooling locations, this case is full of cooling capability.

Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the center of the fans create a mesmerizing LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of when it comes to keeping temperatures balanced & conditions optimized for peak performance.

Connectivity and ARGB Lighting Customization

Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Raider we have included a 6-port magnetic ARGB fan hub with controls for your LED lighting and have access to approximately 25 LED modes or have access to 16.8 million colors using a compatible addressable RGB Motherboard.

The inside of this case is all black and roomy, so you have plenty of space to build a powerful gaming PC. You can fit a long graphics card (up to 35 centimeters), a CPU cooler up to 16 centimeters tall, and two of each size of hard drive (2.5-inch and 3.5-inch). There’s also space for a standard ATX power supply unit up to 200 millimeters long.

Build a striking gaming chassis with ease and create a gaming PC with real purpose and intent using the Raider.

Features:

Classy Raider

The CiT Raider is built using a combination of premium materials, the chassis is 0.5mm SPCC steel and the front and left-hand side paneling is made with stylish 4mm tempered glass and a 70% / 30% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by a black interior for that classic look.

High-End Cooling 

This CiT Raider Black ATX Gaming Case comes with six fancy built-in fans already installed! Three are in the front, two on top, and one in the back. These inner-ring infinity fans all light up and can be controlled in two ways. There’s a button on the case itself, or you can connect them to your motherboard for even more lighting options.

Six Infinity 120mm ARGB Inner-Ring Black Fans 

This version of the CiT Raider Black ATX Gaming Case comes with 6 x Infinity 120mm ARGB Inner-Ring Black Fans. With the inner ring and the circular-shaped, multi-layer Infinity Mirror Design, the Infinity fans add a mesmerizing LED lighting display to the Raider.

Tempered Glass Panel 

The solid 4mm tempered glass panels with 70% tinted glass on the front and 30% tinted glass on the side add a premium finish reduce glare and offer an obstructed view of the interior, components, and ARGB.

Motherboard Software 

The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customize the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

VDG Connector Included

A 3-pin VDG connector is included which is intended for use with older Gigabyte and Aorus Motherboards.

Fan Controller Included 

A 6-port magnetic hub is included inside the Raider, designed with a magnet that can easily fit inside your case. Add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable – you can set it without any additional cables.

Available In Two Colours 

The CiT Raider Black ATX Gaming Case is available in two colors, black or white. The model of the Raider is black, the perfect backdrop for high-end hardware and RGB lighting.

PSU Shroud 

This CiT Raider Black ATX Gaming Case has a special cover that hides your power supply wires and has room for two hard drives. There’s space for two more drives behind the motherboard, so you have plenty of storage for your games!

ATX Housing 

Standing at 450mm high, 192mm wide, and 405mm deep the Raider is compatible with a wide range of components, with 350mm of clearance for GPUs and it can facilitate CPU coolers up to 160mm tall. There are seven expansion slots on the rear panel for PCIe devices.

I/O Panel 

Providing you with varied connectivity support, the Raider has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0, and HD Audio, as well as an LED Button (Reset Switch).

Specifications:

• Chassis Dimensions (Excluding Fascia / Panels): (W) 192 x (H) 435 x (D) 375mm
• Water Cooling Support:
  • Front Supported Radiator(s): 120mm and 240mm
  • Top Supported Radiator(s): 120mm and 240mm
  • Rear Supported Radiator(s): 120mm
• Cooling Fan:
  • Fan Powered Via: 3pin Fan Connector
  • Fan LEDs Powered Via: 3pin AURA
• Fan Controller Support:
  • Fan Controller Included: Yes
  • Fan Controller Power Via: SATA Connector
• LED Controller: Yes
• Fan Power Connector: 3 or 4pin
• LED Power Connector: 3pin AURA
• Fan Control Via: LED Button (Reset Switch) or MB Sync
• Supported Qty of Fans (Max.): 6
• Supported Qty of LEDs (Max.): 6

• Additional Chassis Specifications:

  • PSU Max. Length: 200mm
  • Packaging Type: EPE Foam
  • Packaging Thickness: 19.23mm
• Form Factor: Midi-Tower
• Motherboard Support: ATX, Micro ATX, Mini ITX
• PSU Support: Standard ATX
• PSU Location: Bottom
• Gaming Case: Yes
• Water Cooling: Water Cooling Ready!
• Supported Radiator Size: 240mm
• Supported Radiator Positions: Front, Top
• Body Material: SPCC 0.5mm
• Front Bezel Material: ABS & 4mm Tempered Glass With 70 Percent Tint
• Side Panel: 4mm Tempered Glass With 30 Percent Tint
• Internal Cable Management Depth: 15mm
• External Bays: N/A

• Internal Bays:

  • 2 x 3.5” Internal
  • 2 x 2.5” Internal
• Drive Bay Notes: N/A
• Expansion Slots: 7 x Full Size
• Cooling Front: Space For 3 x 120mm Fans (3 x 120mm ARGB Infinity Inner-Ring Fans Included)
• Cooling Top: Space For 2 x 120mm Fans (2 x 120mm ARGB Infinity Inner-Ring Fans Included)
• Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Infinity Inner-Ring Fan Included)
• Cooling Side: None
• Cooling Bottom: Space For 2 x 120mm Fans
• Fan Controllers: 1 Fan Controllers, controlling up to 6 fans in total
• IO Ports:
  • 1 x USB 3.0
  • 2 x USB 2.0
  • 1 x HD Audio
  • 1 x Microphone
• GPU Max Length: 350mm
• CPU Cooler Maximum Height: 160mm
• Front Bezel Colour: Black / Glass
• Body Colour: Black
• System Cabinet Features:
  • PSU Included: No