The CiT Phantom XL Black E-ATX Case is a gamer’s case with style and function for ATX builds. It’s affordable, looks great, and comes with cool fans!

The CiT Neo is a stylish and powerful case for gamers building ATX computers. It keeps things cool with a mesh front panel that lets in lots of air. It also comes with four CiT Tornado fans to help cool even the hottest parts. You can add even more cooling with water cooling kits or extra fans on the top or near the power supply.

The Neo looks tough with its sharp angles on the front. It also has fancy built-in fans with infinity mirror lighting effects. These fans look cool and help keep your computer from overheating. On the top of the case, you’ll find USB ports to connect your devices.

Inside, there’s a hub to control the lighting effects of the fans. The case is black and sleek, and it can fit a long graphics card and several hard drives. It also has dust filters you can easily take out to clean.

Features:

Mesh ATX Gaming Case 

The CiT Phantom XL Black E-ATX Case is a bold and sophisticated gaming case finished in all black with a mesh front panel that allows air to flow into the case easily without obstruction combining a super airflow performance with dust filtration, making this stylish chassis ideal for any gaming room.

Four CiT Fans Bundled 

The CiT Phantom XL Black E-ATX Case has four special fans called CiT Tornado Infinity fans. These fans are quiet but can be set to move more air if needed. They also have cool lighting effects. Note: The fans are already installed in the case.

Fan Controller Included 

A PWM hub is included inside the Neo which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and it’s connected to the Motherboard using a single cable – you can set it up without any additional cables.

PWM Fan Control 

The hub can be connected to the CPU fan interface on your chosen Motherboard to access temperature readings. An increased CPU temperature increases the fan speed automatically and swiftly cools the system down. Conversely when the CPU temperature decreases the fan automatically slows reducing the overall noise.

Motherboard Software 

The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customize the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

Tempered Glass Panel 

The solid tempered glass side panel offers an excellent view of the interior specifically of the Motherboard & Graphics Card.

Available In Two Colours 

The CiT Phantom XL Black E-ATX Case is available in two colors, black or white. This model of the Neo is black, the perfect backdrop for high-end hardware and ARGB lighting.

PSU Shroud 

The CiT Neo keeps things clean with a special panel that hides your cables and shows off your power supply. This panel also has space for your hard drives. You can put in two 2.5-inch drives two 3.5-inch drives, or a mix of both. There are even extra slots for two more 2.5-inch drives if you need them. The panel fits power supplies up to 200mm long.

ATX Housing 

ATX, Micro-ATX, and Mini-ITX Motherboards are compatible and graphics cards up to 340mm in length and CPU coolers up to 170mm in height are supported – there is adequate space for mainstream hardware to build a high-powered PC Gaming case.

Specifications:

• Chassis Dimensions (Excluding Fascia / Panels): (W) 216 x (H) 465 x (D) 350mm
• Water Cooling Support:
  • Front Supported Radiator(s): 120mm, 240mm, 280mm and 360mm
  • Top Supported Radiator(s): 120mm, 240mm and 280mm
  • Rear Supported Radiator(s): 120mm
• 6 x 120mm ARGB Fans Included:
  • Fans Powered Via: 3pin Fan Connector
  • Fans LEDs Powered Via: 3pin AURA
• Fan Controller Support:
  • Fan Controller Included: Yes
  • Fan Controller Power Via: SATA Connector
• LED Controller: Yes
• Fan Power Connector: 3pin
• LED Power Connector: 3pin AURA
• Fan Control Via: LED Button or MB Sync
• Supported Qty of Fans (Max.): 6
• Supported Qty of LEDs (Max.): 6

• Additional Chassis Specifications:

  • Expansion Slots: 7 x Full Size (Horizontal) and 2 x Full Size (Vertical)
  • PSU Max. Length: 190mm
  • Max. Motherboard Size: (W) 305 x (D) 340mm
• Form Factor: Midi-Tower
• Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX
• PSU Support: Standard ATX
• PSU Location: Bottom
• Gaming Case: Yes
• Water Cooling: Water Cooling Ready!
• Supported Radiator Size: 360mm
• Supported Radiator Positions: Front, Top
• Body Material: 0.6mmSPCC
• Front Bezel Material: ABS & Crinkle Mesh
• Side Panel: 4mm Full Tempered Glass
• Internal Cable Management Depth: 25mm
• External Bays: N/A
• Internal Bays:
  • 2 x 3.5” Internal
  • 1 x 2.5” Internal
• Drive Bay Notes: 1 x 3.5″ shared with 1 x 2.5″
• Expansion Slots: 9 x Full Size
• Cooling Front: Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mm ARGB Black Fans Included)
• Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans (2 x 120mm ARGB Black Fans Included)
• Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Black Fan Included)
• Cooling Side: None
• Cooling Bottom: Space for 2 x 120mm Fans (On PSU Cover – Not Included)
• Fan Controllers: 1 Fan Controllers, controlling up to 6 fans in total
• IO Ports:
  • 1 x USB 3.0
  • 2 x USB 2.0
  • 1 x HD Audio
  • 1 x Microphone
• GPU Max Length: 345mm
• CPU Cooler Maximum Height: 160mm
• Front Bezel Colour: Black
• Body Colour: Black
• System Cabinet Features:
  • PSU Included: No