A new, unused item with absolutely no signs of wear. The item may be missing its original packaging, or the original packaging has been opened or is no longer sealed. The item may be a factory second, or a new and unused item with minor defects.

Enhance your gaming decor with the CiT Blade ARGB PC Case. Featuring six ARGB Inner-Ring fans as well as providing ample support for all your high-end hardware.

Take your setup to new levels with this distinctive and customisable ATX gaming chassis with a stylish and elegant dual tempered glass panelling with a 70% tint joined by dedicated front ventilation channels combine to offer a stunning look and substantial airflow this case has the functionality and aesthetics to match.

Surrounded from every angle with smart ARGB fans, customisable RGB lighting and effortless cable management. Within the interior of the Blade includes cable routing holes on the Motherboard backplate that makes managing your cables nice and easy and keeps your PC looking clean.
Install another two fans to fully populate the Blade and make it eight fans, fan mounts on the PSU shroud for improved VGA cooling and with up to three water cooling locations, this case is full of cooling capability.

Moving onto the top of the case the I/O panel provides varied connectivity support with USB3.0 and USB2.0 connections and inside the Blade we have included a 6-port magnetic ARGB fan hub with controls for precise control of your LED lighting and have access to approximately 25 LED modes or have access to 16.8 million colours using a compatible addressable RGB Motherboard.

This completely white interior has smart build potential with a spacious interior offering wide support for a range of gaming hardware to build a powerful effective gaming PC. It can fit a graphics card up to 29 centimetres in length, CPU Cooler up to 15.5 centimetres in height and can hold 2 x 2,5″ and 2 x 3,5″ drives (Please note only 1 x 2.5″ or 1 x 3.5″ hard drive can be mounted in the stated locations). An ATX power supply unit measuring up to 150mm will fit inside.

Build a signature gaming case with ease and create a sharp gaming PC with real style using the Blade.

Key Features
Elegant Blade – The CiT Blade is built using two tempered glass panels perfect for showing off your system and lighting, with dedicated front ventilation channels for ample airflow and tempered glass panelling with a stylish 70% tint to showcase your ARGB fans and key components. The tempered glass is surrounded by white interior for that crisp aesthetic.

High-End Cooling – There are six pre-installed Inner-Ring ARGB fans on the CiT Blade. There are three 120mm fans mounted onto the front panel, whilst there are two 120mm fans are mounted on the top and a single fan on the rear panel. These fans can be controlled one of two ways either via the integrated LED button on the I/O panel or by connecting the 5V 3pin connector from the hub to your Motherboard.

Fan Controller Included – A 6-port magnetic hub is included inside the Blade, designed with a magnet it can easily fit inside your case. Add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and can be connected to your Motherboard using a single cable – you can setup without any additional cables.

Motherboard Software – The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.

VDG Connector Included – A 3pin VDG connector is included which is intended for use with older Gigabyte and Aorus motherboards.

Tinted Tempered Glass Panels – The solid tempered glass panels with 70% tinted glass adds a premium finish and reduces glare and offers an obstructed view of the interior, components and ARGB.

Available In Two Colours – The CiT Blade is available in two colours, black or white. The model of the Blade is the white, perfect for enhancing the RGB by helping to reflect the colour on your internal components, giving it a crisp and elegant feel.

PSU Shroud – To keep the interior looking neat and tidy the Blade has a dedicated vented PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. The PSU shroud can mount a 2.5″ or 3.5” hard drive. There is another hard drive slot available on top of the PSU shroud so in total there is 2 x 2.5” and 2 x 3.5” that can be mounted to this chassis (Please note only 1 x 2.5″ or 1 x 3.5″ hard drive can be mounted in the stated locations).

Vented Side Panel – The right-hand side panel made of metal is vented, natural airflow increases thanks to the additional ventilation through the circular cut-outs.

ATX Housing – Standing at 447mm high, 194mm wide and 338mm deep the Blade is compatible with a wide range of components, with 290mm of clearance for GPUs and it can facilitate CPU coolers up to 155mm tall. There are seven expansion slots on the rear panel for PCIe devices.

I/O Panel – Providing you with a varied connectivity support, the Blade has a fully equipped I/O panel featuring one USB 3.0, two USB 2.0 and HD Audio, as well as a LED Button (Reset Switch).

Specifications
Chassis Dimensions (Excluding Fascia / Panels):    (W) 192 x (H) 447 x (D) 338mm
Water Cooling Support:   
Front Supported Radiator(s):    120mm and 240mm
Top Supported Radiator(s):    120mm and 240mm
Rear Supported Radiator(s):    120mm
Cooling Fan:   
Fan Powered Via:    3pin Fan Connector
Fan LEDs Powered Via:    3pin AURA
Fan Controller Support:   
Fan Controller Included:    Yes
Fan Controller Power Via:    SATA Connector
LED Controller:    Yes
Fan Power Connector:    3 or 4pin
LED Power Connector:    3pin AURA
Fan Control Via:    LED Button (Reset Switch) or MB Sync
Supported Qty of LEDs (Max.):    6
Supported Qty of LEDs (Max.):    6
Additional Chassis Specifications:   
PSU Max. Length:    150mm (3.5″ drive installed) & 190mm (2.5″ drive installed)

Case Specifications
Form Factor:    Midi Tower
Motherboard Support:    ATX, Micro ATX, Mini ITX
PSU Support:    Standard ATX
PSU Location:    Bottom
Gaming Case:    Yes
Water Cooling:    Water Cooling Ready!
Supported Radiator Size: 240mm
Supported Radiator Positions: Front, Top
Body Material:    0.61mmSPCC
Front Bezel Material:    ABS & Tempered Glass With 70 Percent Tint
Side Panel:    Tempered Glass With 70 Percent Tint
Internal Cable Management Depth:    15mm
External Bays:   
Internal Bays:    2 x 3.5” Internal
2 x 2.5” Internal
Drive Bay Notes:    2 x 2.5″ bays share 3.5″ bays
Expansion Slots:    7 x Full Size
Cooling Front:    Space For 3 x 120mm Fans (3 x 120mm Inner-Ring ARGB Fans Included)
Cooling Top:    Space For 2 x 120mm Fans (2 x 120mm Inner-Ring ARGB Fans Included)
Cooling Rear:    Space For 1 x 120mm Fan (1 x 120mm Inner-Ring ARGB Fan Included)
Cooling Side:    Vented
Cooling Bottom:    Space For 2 x 120mm Fans
Fan Controllers:    1 Fan Controllers, controlling up to
6 fans in total
IO Ports:    1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
GPU Max Length:    290mm
CPU Cooler Maximum Height:    155mm
Front Bezel Colour:    White / Glass
Body Colour:    White
System Cabinet Features:   
PSU Included:    No