Arctic Freezer 7 X Compact Heatsink & Fan, Intel & AMD Sockets, 92mm PWM Fan, Fluid Dynamic Bearing, 6 Year Warranty

Compact Multi-Compatible CPU Cooler

  A worthy Freezer 7 Pro Successor: Better Price – Better Performance

  The ARCTIC Freezer 7 X is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC has been able to significantly improve the cooling performance of Freezer 7 X.

Compatible with Intel & AMD Sockets

  The Freezer 7 X is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

Pre-applied MX-2 Thermal Paste

  Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan Thanks to its Low Coil Temperature

  The Freezer 7 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X.

Offset Heat Pipes Enable Optimal Heat Dissipation

  The direct touch heat pipes attached to the Freezer 7 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

More Efficient and Whisper Quiet

  In addition to operating more quietly, even at maximum speed, the Freezer 7 X built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X to run at a whisper-quiet 0.3 sone when at maximum speed.

10 % More Cooling Capacity with Freezer 7 X

  The ARCTIC Freezer 7 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

P-fan for Increased Performance

 Inspired by the P-series, the fan of the Freezer 7 X benefits from all of the advantages of P-fans:

    • High static pressure for increased cooling performance

    • Broad RPM range

    • Lower power consumption

    • Less vibration

    • PWM for synchronous fan control

Fluid Dynamic Bearing

  Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

Direct Touch Heat Pipes

  The Freezer 7 X uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Specification

Type: Heatsink and Fan

AMD/Intel: Combo

Compatibility: “Intel:

1200, 1151, 1150, 1155, 1156, 775

AMD:

AM4 , AM3( ), AM2( ), FM2( ), FM1″

Fan Connector(s): 4-pin

Installation: Pins

LED Lighting: No

Colour: Black & White

Weight: 425g

Fan Dimensions: 92mm

Dimensions: (WxHxD) 110.5 x 132.5 x 74.3 mm

Fan Controller: PWM

Rotation Speed: 300 – 2000 RPM

Fan Bearing: Fluid Dynamic Bearing

775 Socket: Supports Socket 775

Noise level: 0.3 Sone

Power: 0.07 A / 12 V DC

Package Type: Retail

Package Weight: 0.5150 kg

Warranty: 6 Years

115x Sockets: Supports Sockets 115x

1200 Socket: Supports Socket 1200

AM4 Socket: Supports Socket AM4

AM3( ) Socket: Supports Socket AM3( )

FM2( ) Socket: Supports Socket FM2( )

FM1 Socket: Supports Socket FM1